POR-15 Fuel Tank Repair Kit

POR-15 Fuel Tank Repair Kit has what you need to repair and seal your metal automotive, agricultural farm or industrial machinery gas, diesel fuel tanks, and DEF tanks. POR-15 Fuel Tank Repair Kit will stop rust, corrosion, and seal pinhole leaks. Your fuel tank will be impervious to all additives, gas, and diesel consumer fuels, including ethanol, and higher alcohol content and stage 2 fuel kits. It has superior strength and fuel resistance.

POR-15 Fuel Tank Repair Kit is more than just pouring a quart of sealer and sloshing it around. If gum, varnish, sludge, or fuel are inside, they must be removed first. This kit includes our cleaning and neutralizing etching products to improve sealer adhesion in old tanks.

Like other sealers, POR-15 Fuel Tank Sealer will not work in a contaminated fuel tank. Our sealer is designed for metal fuel tanks only. Find out what the pros already know... our POR-15 Fuel Tank Repair Kit has everything you need to do the job right!

The POR-15 Fuel Tank Repair Kit includes 1 quart of sealer for up to a twenty-five-gallon fuel tank.

Fuel Tank Sealer Color: Silver

Give us a call if you have any questions.

POR-15 FUEL TANK REPAIR KIT CONTAINS

POR-15 Cleaner Degreaser to remove gum, sludge, varnish
POR-15 Metal Prep to remove rust & prepare the tank for sealer
POR-15 Fuel Tank Sealer creates a permanently sealed tank
Detailed instructions are provided to take you easily through each step of tank restoration using these anti-corrosion products.

POR-15 Fuel Tank Repair Kit Technical Data Sheet (PDF)

Step-by-Step Restoration

Before Fuel Tank Repair — Before: This fuel tank had small pinhole leaks on the end near the seam. If the tank had a competitor's old failed sealer, it should be removed before starting the repair process.

Step 1 fuel tank repair — Step 1: Mix 1 quart Cleaner Degreaser with 1 quart of hot water. This solution will be used to remove any gum, varnish, or sludge from the inside of the tank.

Step 2 fuel tank repair — Step 2: Pour the entire bottle of Metal Prep to dissolve rust, coat the tank with zinc phosphate, and etch the metal for better adhesion of the sealer.

Step 3 fuel tank repair — Step 3: After the tank is clean, drain the tank and rinse thoroughly with water. Let the tank dry. When totally dry, pour in the entire can of Fuel Tank Sealer.

Step 4 fuel tank repair — Step 4: After all surfaces have been coated, drain the tank for about an hour to remove excess sealer from the tank.

Completed fuel tank repair — Step 5: Once repaired, use fuel preservation & stabilizer to keep your entire fuel system in proper working order and to avoid "stale gas" problems in your future!

Ag and Farm, Industrial, Fleet Service Products